Integrated Mirroring Enhanced Volume - Asus 1064E - PIKE Storage Controller SAS User Manual

2.2.2

Integrated Mirroring Enhanced volume

The Integrated Mirroring Enhanced (IME) supports three to ten disks, or seven
mirrored disks plus two hot spare disks.
To create an IME volume:
Follow steps 1–4 of the section Integrated Mirroring volume.
1.
The Select New Array Type screen appears.
2.
Use the arrow keys to select Create IME Volume, then press <Enter>.
LSI Corp Config Utility
Select New Array Type -- SAS1064E
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
The Create New Array screen shows the disks you can add to make up the
3.
IME volume.
Integrated Mirroring Enhanced (IME) supports three to ten disks, or seven
mirrored disks plus two hot spare disks. Use the arrow key to select a disk,
then move the cursor to the RAID Disk column. To include this disk in the
array, press <+>, <->, or <Space>.
You may also specify the Hot Spare disk here. Select the disk, then move the
cursor to the Hot Spr column, then press <+>, <->, or <Space>.
LSI Corp Config Utility
Create New Array -- SAS1064E
Array Type:
Array Size(MB):
Slot
Num
0
1
2
3
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
2-8
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL Data on array disks will be deleted!
Create Integrated Striping array of
2 to 10 disks.
ALL Data on array disks will be deleted!
F1/Shift+1 = Help
Device Identifier
SEAGATE ST336754SS
SEAGATE ST336754SS
SEAGATE ST336754SS
SEAGATE ST336754SS
F1/Shift+1 = Help
v6.20.00.00 (2007.12.04)
v6.20.00.00 (2007.12.04)
IME
51498
RAID Hot Drive
Disk Spr Status
0003 [Yes] [No] ------- ----
0003 [No] [No] ------- ----
0003 [Yes] [No] ------- ----
0003 [Yes] [No] ------- ----
C = Create array
Pred Size
Fail (MB)
35003
35003
35003
35003
Chapter 2: RAID configuration