Asus 1064E - PIKE Storage Controller SAS User Manual page 15

The Adapter Properties screen appears.
4.
Use the arrow keys to select RAID Properties, then press <Enter>.
LSI Corp Config Utility
Adapter Properties -- SAS1064E
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item -/+/Enter = Change Item
The Select New Array Type screen appears.
5.
Use the arrow keys to select Create IM Volume, then press <Enter>.
LSI Corp Config Utility
Select New Array Type -- SAS1064E
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
ASUS PIKE 1064E/1068E
v6.20.00.00 (2007.12.04)
SAS1064E
20
02:00:00
1.24.00.00-IR
500E0188:01111705
2D.02
Enabled
0
[Enabled BIOS & OS]
F1/Shift+1 = Help
v6.20.00.00 (2007.12.04)
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 10 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
2-5