Windows ® Server 2003 Os - Asus 1064E - PIKE Storage Controller SAS User Manual

3.1.2 Windows
During Windows
To install the RAID card driver when installing Windows
1. Boot the computer using the Windows
Window
2. Press <F6> when the message "Press F6 if you need to install a third party
SCSI or RAID driver..." appears at the bottom of the screen.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver...
3. The next screen appears. Press <S> to specify an additional device.
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
3-4
Server 2003 OS
®
Server 2003 OS installation
®
Setup starts.
®
Server 2003 OS installation CD. The
®
ENTER=Continue F3=Exit
Server 2003 OS:
®
Chapter 3: Driver installation