Linux Error Messages - Asus 1064E - PIKE Storage Controller SAS User Manual

2.3.4

Linux Error Messages

The following messages may appear while you are installing MegaRAID Storage
Manager software on a Linux system:
More than one copy of MegaRAID Storage Manager software has been
•
installed.
This message indicates that the user has installed more than one copy of
MegaRAID Storage Manager software. (This can be done by using the rpm-
force command to install the rpm file directly, which is not recommended,
instead of using the install.sh file.) In such cases, the user must uninstall all the
rpm files manually before installing MegaRAID Storage Manager software with
the procedure listed previously.
• The version is already installed.
This message indicates that the version of MegaRAID Storage Manager
software you are trying to install is already installed on the system.
• The installed version is newer.
This message indicates that a version of MegaRAID Storage Manager
software is already installed on the system, and it is a newer version than the
version you are trying to install.
• Exiting installation.
This is the message that appears when the installation is complete.
• RPM installation failed.
This message indicates that the installation failed for some reason. Additional
message text explains the cause of the failure.
2-26 Chapter 2: RAID configuration