Dell PowerEdge 2600 Installing Or Replacing Manual page 4

Remove the front fan assembly:
4
a
b
c
F i g u r e 1 - 1 .
1-2 I n st al ling or Re p la c in g a n ER A/ O Ca r d
Disconnect the front fan assembly power cable from the front fan connector on
the SCSI backplane board.
Release the fan assembly by pressing the release latch. See Figure 1-1.
Swing the fan assembly up and out of the way.
R e m o v i n g t h e F r o n t Fa n A s s e m b l y
release latch