Table of Contents
Advertisement
5-2-9 Power Configuration
Restore on AC Power Loss
Defines the power state to resume to after a sys- tem shutdown that is due to an interruption in AC
power. When set to Last State, the system will return to the active power state prior to shutdown. When
set to Stay Off, the system remains off after power shutdown.
Options available: Last State/Stay Off/Power On. The default setting depends on the BMC setting.
Power On by RTC Alarm
Select whether to wake up the system when an RTC alarm is detected.
Options available: Enabled/Disabled. Default setting is Disabled.
Power On by LAN Device
Select whether to wake up the system by LAN device.
Options available: Enabled/Disabled. Default setting is Enabled.
Power On by Modem Ring
Select whether to wake up the system by modem ring.
Options available: Enabled/Disabled. Default setting is Enabled.
(Note)
When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
BIOS Setup
(Note)
- 50 -
Advertisement
Table of Contents
