Jumper Setting - Gigabyte GS-R22PD Service Manual

4-2

Jumper Setting

2 4
1 3
No. Jumper Code
BIOS WP
1.
(BIOS Write Protect
Jumper)
CLR_CMOS
2.
(Clearing CMOS Jumper)
CLR_PWD
3.
(Clear Supervisor
assword Jumper)
BIOS_RVCR1
4.
(BIOS Recovery Jumper)
ACK_Mode
5.
(ACK Mode Select
Jumper)
1-2 Close: Normal operation. (Default setting)
2-3 Close: Enable BIOS write protect function.
1-2 Close: Normal operation (Default setting)
2-3 Close: Clear CMOS data
1-2 Close: Normal operation. (Default setting)
2-3 Close: Clear supervisor password.
1-2 Close: Normal operation (Default setting)
2-3 Close: BIOS recovery mode.
1-2 Close: For 2U4N System.
2-3 Close:For Open Rack System.
- 31 -
Jumper Setting
5
Hardware Installation