Table of Contents
Advertisement
5-2-5 SATA Configuration
SATA Mode
Select the on chip SATA type.
IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the
IDE emulation mode. This is not allowed to access RAID setup utility.
RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.
AHCI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID
function is disabled and cannot be access the RAID setup utility at boot time.
Options available: IDE/RAID/AHCI/Disabled. Default setting is AHCI Mode.
Serial ATA Controller 0/1
Determine the onboard SATA controller mode.
Compatible: SATA and PATA drives are auto-detected and placed in Legacy mode.
Enhanced: SATA and PATA drives are auto-detected and placed inNative mode.
Options available: Disabled/Enhanced/Compatible.
Default setting for Serial ATA 0 is Compatible.
Default setting for Serial ATA 1 is Enhanced.
SATA Port 0/1/2/3/4/5
Displays the installed HDD devices information. Press [Enter] to view detail information of the installed
HDD devices.
BIOS Setup
- 45 -
Advertisement
Table of Contents
