1-2 Product Specifications (Per Node)
CPU
Chipset
Memory
LAN
Expansion Slot
Onboard
Graphics
Mass Storage
System Fans
USB
Internal
Connectors
(Motherboard)
Internal
Connectors
(Back Plane
Board)
Support for Dual Intel
Intel
Xeon
Quad Core in LGA 1356 socket
®
®
Supports QuickPath Interconnect up to 8GT/s
Enhanced Intel SpeedStep Technology (EIST)
Support Intel Virtualization Technology (VT)
Intel
C600 (Patsburg) Chipset
®
12 x 1.5V/1.35V DDR3 UDIMM sockets supporting up to 96 GB of system memory
12 x 1.5V/1.35V DDR3 RDIMM/LRDIMM sockets supporting up to 384 GB of
system memory
Four channel memory architecture
Support for 800/1066/1333 memory modules
Support for ECC RDIMM/ UDIMM memory modules
2 x Broadcom
BCM5720 supports 10/100/1000 Mbps (Share NIC Management
®
support)
1 x ASPEED 2300 supports 10/100 Mbps (Dedicated management LAN port)
Low-Profile:
1 x PCI Express x16 slot, running at x16 (PCIE_1/Proprietary/Gen3)
Mezzanine:
1 x PCI Express x8 slot, running at x8 (PCIE_2/Proprietary/Gen3)
ASPEED AST2300 supports 128MB VRAM
3 x 3.5" Hot-Swap SATA/SAS HDDs
Support for Intel IRST SATA RAID 0, RAID 1, RAID 5, RAID 10
4 x 80x80x38mm 13800rpm
Up to 4 USB 2.0/1.1 ports (2 on the back panel, 2 via the USB brackets connected
to the internal USB headers)
1 x 9-pin ATX 12V power connector
4 x SATA 3Gb/s connectors
2 x SATA 6Gb/s connectors
1 x IPMB header
1 x front panel header
1 x USB 2.0/1.1 headers
1 x Serial port header
1 x VGA header
1 x SPGIO header
1 x PMBus header
12 x SATA/SAS 6Gb/s connectors
2 x 10-pin power connectors
2 x front panel header
4 x bridge board connectors
Xeon
Sandy-bridge-EN 2S processors in 1356 socket
®
®
- 11 -
Hardware Installation