Table of Contents
Advertisement
Resume On PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Enable PCIE Device Wake [Disabled]
Allows you to enable or disable the PCIE Device to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.5.5
Hardware Monitor
Hardware Monitor
CPU1 Temperature
CPU2 Temperature
MB Temperature
CPU Fan1 Speed
CPU Fan2 Speed
Front Fan1 Speed
Front Fan2 Speed
Rear Fan1 Speed
Rear Fan2 Speed
Smart Fan Control
CPU1 Target Temperature
CPU2 Target Temperature
MB Target Temperature
VCORE1 Voltage
VCORE2 Voltage
Use the arrow down key to display additional items.
5V Voltage
5VSB Voltage
VBAT Voltage
12V Voltage
CPU1/CPU2 Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select [Ignored] if you do not wish to
display the detected temperatures.
4-28
[38ºC/100ºF]
[41ºC/105.5ºF]
[47ºC/114ºF]
[3884RPM]
[3648RPM]
[1917RPM]
[N/A]
[N/A]
[N/A]
[Enabled]
[060]
[060]
[050]
[ 1.320V]
[ 1.320V]
[ 5.094V]
[ 4.980V]
[ 3.120V]
[12.053V]
CPU1 Temperature
Chapter 4: BIOS setup
Advertisement
Table of Contents
