4.6.1
Boot Device Priority
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available
devices. The number of device items that appears on the screen depends
on the number of devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]
4.6.2
Boot Settings Configuration
Boot Settings Configuration
Quick Boot
Full Screen Logo
Bootup Num-Lock
PS/2 Mouse Support
Wait For 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2�� feature.
4-30
[1st FLOPPY DRIVE]
[ATAPI CD-ROM]
[Hard Drive]
[Enabled]
[Enabled]
[On]
[Auto]
[Enabled]
[Enabled]
[Disabled]
Specifies the boot
sequence from the
available devices.
A device enclosed
in parenthesis has
been disabled in the
corresponding type
menu.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 4: BIOS setup