Quick Reference - Honeywell XL4600SM Owner's Manual

QUICK REFERENCE
TURN SYSTEM ON
.
Check to make sure the system is READY - Green ready hght is lit+
. Enter your 4-digit user codem
rl rl n
. The On/Off (Arm) light will tight
* Exit through a door designated by your installer as an exiffentry door
TURN SYSTEM OFF
.
Enter through a door designated by your installer as an exitientry door
. Enter your 4-digit user cod~l m m ~
. The System On (Arm) hght will go out
TURN SYSTEM ON AND STAY INSIDE
.
Check to make sure the system is READY - Green ready light is lit+
-
Followed by your user code m m m m
. The OtiOff (arm) light and the Stay light will both light
REMEMBER: You must turn the syetem off if you want to open the door or leave
the premises after the exit tima has passed.
TURNTHESYSTEM ON: PERIMETERSENSORS INSTANTMODEAND STAY INSIDE
. Check to make sure the system is READY - Green ready tight is lit+
-
'"'lowed by
-
Followed by your user code ~ rl m
. The On/Off Hght, the Instant tight and the Stay light will all be on
SMOKE DETECTOR RESET
.
Enter your 4-digit user code [1 rl n ~
t ready tight not available on all keypads
Page 3