Table of Contents
Advertisement
Overview
Pan Bracket : Control panning angle of camera.
Rotate Body : Control rotating angle of camera.
x3.6 Vari-focal Lens Module : 2.8 ~ 10.0mm(F1.2).
Video Output Terminal to Monitor
F unction Setup switch : Display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
UTP Cable : For supplying AC 24V / AC28V power to the camera and transmitting video
signals.
V ideo Output Jack : Video signals are output through this port. Connect this port to the
Video IN port of a monitor.
P ower input terminal : If the UTP cable cannot be connected for power supply (distance
over 300m(1000ft), for example), this cable is used instead for connecting DC 12V / AC
24V power to the camera.
Dome Cover
Shield Case
10
COLOR DOME CAMERA
User Guide
Installation
Notes
• T he installation should be done by qualified service personnel or sytem installers.
• I f the ceiling material is not strong enough to hold the installation screws, the camera
may fall off. Reinforce the ceiling as needed.
1) Separate the dome cover by rotating anti-clockwise.
2) Separate the shield case by pulling from the camera body.
Latch
Locking direction
[Figure 1]
Unlocking direction
(Anti-clockwise)
COLOR DOME CAMERA
Installation
* To install the dome cover on the camera
body, turn the latches in locking direction
as shown in the figure 1.
Main Body
(Camera)
Shield Case
Locking direction
(Clockwise)
Dome cover
11
User Guide
Advertisement
Table of Contents
