Samsung SUD-2080 User Manual page 14

Super high resolution utp dome camera
Hide thumbs Also See for SUD-2080:
Table of Contents

Advertisement

Operating Your Camera
Notes
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size. (In
NIGHT ONLY mode.)
• The HLC is not activated in day light or when bright light is not present at night. (In NIGHT
ONLY mode.)
SSNR3
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3' .
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
2. Select a desired mode using the Function Setup switch.
ON : Activates SSNR3 so that noise is reduced.
OFF : Deactivates SSNR3. Noise is not reduced.
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust
the noise reduction level.
26
COLOR DOME CAMERA
DC
ATW
OFF
OFF
ON
AUTO
User Guide
Notes
• You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is
'OFF'.
• When adjusting the noise reduction level in the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced, as will the brightness of the image.
DAY/NIGHT
You can display pictures in color or in black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Function
Setup switch so that the arrow indicates 'DAY/NIGHT'.
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
8.SPECIAL
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
AUTO : The mode is switched to 'Color' in a normal
environment, but switches to 'B/W' mode
when ambient illumination is low. To set up the
switching time for AUTO mode, press the
Function Setup switch.
You can turn on or off the burst signal on
B/W mode.
COLOR DOME CAMERA
DC
ATW
OFF
OFF
ON
AUTO
27
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sud-2080f

Table of Contents