Lens; Exposure; White Bal (White Balance); Ssdr (Samsung Super Dynamic Range) - Samsung SUD-2080 User Manual

Super high resolution utp dome camera
Hide thumbs Also See for SUD-2080:
Table of Contents

Advertisement

Operating Your Camera
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
MAIN SETUP
Select the function using

1.LENS

the Function Setup switch.

2.EXPOSURE

3.WHITE BAL
4.SSDR

5.BACKLIGHT

6.SSNR3

7.DAY/NIGHT

8.SPECIAL

9.EXIT

2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
Notes
• An item with the
icon also has sub menus. To select a sub menu, select an item with
the icon and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
LENS
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, select 'LENS' by using the Function
Setup switch so that the arrow indicates ' LENS' .
MAIN SETUP
1.LENS
2.EXPOSURE
20
COLOR DOME CAMERA
Change the status using
DC
the Function Setup switch.
ATW
OFF
OFF
ON
AUTO
SAVE
DC
User Guide
2. The Lens mode has sub menu site as listed below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus
Settings mode. To a Activate the Focus Settings mode, adjust the lens
focus, and then deactivate the settings mode.
You can adjust the minimum shutter and maximum value of ESC shutter mode.
EXPOSURE
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
SHUTTER : You can select the shutter.
- ---
: Shutter speed is fixed at 1/60sec(1/50sec).
- ESC
: Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60sec~1/120,000sec, PAL MODEL : 1/50sec~1/120,000sec)
- A.FLK
: Select this when you experience picture flicker, this happen when there
is a clash with the installed lighting frequency.
COLOR DOME CAMERA
DC
ATW
25
---
HIGH
OFF
21
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sud-2080f

Table of Contents