Getting To Know Your Monitoring System - Samsung EzVIEW SEW-3022 User Manual

Getting to know your Monitoring system

Wirelessreceiver
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front&BackControls
Receives and sends signals from or to the camera.
Displays video from the camera.
navigationControls/
Use the controls to move and select while in Viewing
Mode and Menu Mode.
Press to go to "File List" if Micro SD card is inserted.
Press to access the receiver menu.
Press the button again to exit.
Transmits audio to the camera when Talk Button is
pressed down and held like a walkie talkie.
navigationControls/

ViewingMode: The following controls are used while watching live video from the camera:
• Press the [+] or [–] keys to increase or decrease the volume.
• Press the [A] key to view cameras in automatic switching mode.
• Press the [M] key to manually switch between cameras.
MenuMode: Use the [+/–/A/M] key arrows to navigate in Menu Mode.

Press the [ ] button to confirm the menu selection.
You must have more than one camera configured on the system when using the functions that requires more than one camera.
`
n
SEW-3022-ENGLISH.indd 5
receiverAntenna
2.4"LCdScreen
 Button
play
MenuButton
Microphone
Button
SEW-3022
Speaker
Produces the sound transmitted from the camera(s).
BeltClip
When you carry the receiver, use the belt hanger to
hold the receiver onto your belt.
Kickstand
Use to hold the receiver onto a table.
SLeep/  Button
Used to activate the screen saver mode.
Press the [A/M] or [SLeep] button again to exit the
screen saver mode.
If Power Saving mode is deactivated by a sound trigger,
the device will go back to black screen approximately
8 seconds after the last trigger.
This button is also used to delete the selected data on
the Micro SD card while the monitor is in search mode.
2011-04-12 오후 2:52:13
English ·