Table of Contents
Advertisement
o
VerVIeW
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
Receives and sends signals from or to the camera.
Indicator turns green when powered.
When battery is charging, this LED will in green color.
Sound Level Leds
Flashes when sound is detected.
Displays video from the camera.
Navigation Controls /
—
Viewing Mode: The following controls are used while watching live video from the camera:
• Press the [ $ ] or [ % ] button to adjust camera's framing upwards or downwards.
• Press the [ _ ] or [ + ] button to adjust camera's framing to the left or right.
• Press [
] button to zoom in/out the screen.
While in zooming, use [$/%/_/+] button to move the screen around.
• Hold the [
] button for 3 seconds on the monitor to remotely activate or deactivate
the night light on the camera.
10 · Overview
Monitor Antenna
Power Led
4.3" LCd Screen
Button
MeNu Button
Press to access from video monitor mode to menu
mode operation. In menu mode, press this button will go
back to monitor mode with save from selection.
/ SLeeP Button
Press camera icon once to go to the next camera.
1.
Press and hold for 3 seconds to turn on the sleep
2.
mode. User can turn on the video again by pressing
any buttons. If camera is disconnected, monitor screen
would be turned on automatically in Sleep mode.
Microphone
Transmits audio to the camera when [TALK] button is
pressed down and held like a walkie talkie.
Navigation Controls / oK/Night light / ZooM Button
Used to navigate while in Menu Mode.
1.
Used for PTZ operation and Night Light while in
2.
Viewing Mode.
Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode.
Press the [
] button to confirm the menu selection.
Advertisement
Table of Contents
