Features; Accessories; Precautions For Proper Operation - JVC RMP-2580U - Remote Controller For Color Domes Instructions Manual

1. INTRODUCTION

FEATURES

Presetting of up to 64 positions (including the home positions) each, for up to 8 combination cameras (TK-C675B).
Built-in PAN, TILT and ZOOM control for up to 8 cameras.
RS-485 connection system enables cascaded connection of cameras.
Built-in sequential switcher.
Alarm input terminals.
Data I/O terminals for interlocked operation with external peripherals.

ACCESSORIES

Power cord (2 m)

PRECAUTIONS FOR PROPER OPERATION

Do not install the unit in a place subject to direct sunlight,
excessive moisture, dust, or vibrations where ventilation is
poor.
Be careful of strong radio waves and magnetism:
If the unit is near a source of strong magnetism, such as a
radio or TV transmission antenna, power transformer or
motor, the video signal may be subject to interference.
Always use the power cord provided with or specified for
this unit.
CLEAN EXTERIOR
Wipe gently with a soft cloth.
Put cloth in diluted mild soap and wring it well to wipe off
heavy dirt. Then wipe again with a dry cloth.
4
Ferrite Core
Precautions for the PRESET SEQUENCE and AUTO PAN Operations
The life-span of the PRESET SEQUENCE and AUTO PAN
functions is dependent on which camera model is used in
combination with this unit.
When using a TK-C675B camera, the guaranteed zoom lens
operation count is 200,000 times. If the zoom lens opera-
tion is used often, the life-span of the PRESET SEQUENCE
and AUTO PAN functions may be much less than expected.
(Example) Assuming that a ZOOM operation is performed
200,000 x 2 (times) 60 (minutes) 24 (hours) = 277 (days)
Total operations count
For other camera models, please refer to the Handling &
Installation Instructions manuals of the camera in use.
R
REMOTE CONTROL UNIT
RM-P2580
INSTRUCTIONS
REMOTE CONTROL UNIT RM-P2000
CAMERA CAMERA POSITION POSITION
SETUP
ALARM ALARM
MENU MENU SET SET KEY LOCK KEY LOCK AUTO AUTO F-1 F-1 F-2 F-2 F-3 F-3
LENS CAMERA/POSITION PAN/TILT
SPEED SPEED 1 2 3 CAMERA CAMERA POSI- POSI-
TION TION
CLOSE CLOSE IRIS OPEN OPEN 4 5 6 HOME HOME FUNC- FUNC-
TION TION
NEAR NEAR FOCUS FAR FAR 7 8 9 AUTO AUTO PRESET PRESET
AF PAN PAN SEQ SEQ
ZOOM TELE TELE CLEAR CLEAR 0
WIDE WIDE /ALL /ALL ENTER ENTER
For Customer Use:
Enter below the Model No. and Serial
No. which is located on the body. Retain
this information for future reference.
Model No. RM-P2580
Serial No.
Instructions (this manual)
every minute and the camera is used 24 hours
a day:
Daily operating hours