Honeywell IPCAM-WO User Manual page 4

On the right, thumbnail still pictures for each camera will appear. These thumbnails are updated every 10 to
3
20 seconds. You may select a camera to view live video by clicking on that camera. The live video appears on
the left.
You may use the arrow buttons to position a PT (pan & tilt) camera. Use single clicks and allow time for the
4
camera to attain the new position. Use the center Home button to command the camera to its home position
(refer to the detailed description in the "Tool Buttons" topic).
Use the Enlarge button to
bring up a larger dedicated
viewing window.
iP Cameras Online Help Guide
– 2 –
Set the default camera by
checking this box.
If you set a default camera, its
live video will automatically
appear on the left the next
time you launch the video
system.
Firmware update notification.
Refer to the "Updating the
Camera Firmware" topic.