Manual Scanning - Ricoh IS330DC - IS - Flatbed Scanner Operating Instructions Manual

Scanning Documents

Manual Scanning

By setting up a scanner driver that supports the manual scanning function, scan-
ning can be initiated by pressing the {Start} key.
If the manual scanning function is used, then communications between the scan-
ner and the personal computer are no longer needed in cases where it is neces-
sary to set the document in the scanner one sheet at a time, for example.
2
A
Set the manual scanning function through the scanner driver.
B
Set the documents in the scanner.
C
Press the { { { { Start} } } } key. To end manual scanning, press the { { { { Reset} } } } key.
10