Fujitsu fi-6130 Operator's Manual page 99

3.11 Outputting Multi-Images
6. Select the order to output multi-images under [Order (for Multi Image Output)].
Primary: Color/Grayscale - Secondary: Binary
First, a Color or Grayscale image is output, and then a Black-and-White image.
Primary: Binary - Secondary: Color/Grayscale
First, a Black-and-White image is output, and then a Color or Grayscale image.
7. Under [Select Current Image Setting], select a side, and then configure settings for each side in
the [TWAIN Driver] dialog box.
8. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
9. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section
Scanned document images are displayed in the ScandAll PRO window.
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/03/c03_11_01.htm (3/3) [2008/10/30 15:14:27]
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
"2.6 How to Use ScandAll PRO."