Without Using The Quick Menu - Fujitsu PA03586-B205 Operator's Manual

■ Without Using the Quick Menu

The scanning method described below is for the case when you are not using the Quick
Menu.
1.
Check for the [ScanSnap Manager] icon
below.
2.
From the Right-Click Menu, select [Scan Button Settings].
⇒
The ScanSnap setup dialog box appears.
3.
Clear the [Use Quick Menu] check box.
•
When the [ScanSnap Manager] icon
Programs] → [ScanSnap Manager] → [ScanSnap Manager] to start up ScanSnap Man-
ager. Generally, ScanSnap Manager is registered under [Startup] when installed, so
that its icon is displayed on the taskbar when Windows starts.
When it is not registered under [Startup], select the [Start] menu → [All Programs] →
[ScanSnap Manager] → [Startup Register] to register ScanSnap Manager.
•
In Windows 7, the ScanSnap Manager icon is displayed in the menu that appears when
you click in the taskbar.
For information on how to display the ScanSnap Manager icon in the taskbar, refer to
"ScanSnap Manager Icon and Operations" (page 54)
How to Perform a Scan (for Windows Users)
on the taskbar as shown
is not displayed, select the [Start] menu → [All
64