Cleaning the ScanSnap Exterior
Clean the ScanSnap exterior and the stacker with a dry cloth or cloth moistened with a small
amount of Cleaner F1 or any neutral detergent.
•
•
•
Never use paint thinner or other organic solvents.
During the cleaning, prevent water or moisture from getting inside the ScanSnap.
It may take a long time before the cleaner vaporizes if a large quantity is used. When clean-
ing the ScanSnap parts, moisten a cloth with modest quantities of the cleaner. In addition,
wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of
the cleaned parts.
Cleaning the ScanSnap Exterior
Cloth
332
Neutral detergent or
Cleaner F1
Thinner