Fujitsu PA03586-B205 Operator's Manual page 136

3.
Click the [OK] button to close the ScanSnap setup dialog box.
Even if the [Scan] button on the ScanSnap is pressed, the ScanSnap setup dialog box
closes.
4.
Load the business card into the ScanSnap.
• Load the business card so that the front side of the two-sided business card faces
the ADF paper chute (cover).
• To scan multiple business cards, load business cards in a pile.
• Move the side guides so that there is no gap between the business cards edge and
the side guide on both sides.
5.
Press the [Scan] button on the ScanSnap.
⇒
Scanning is started.
⇒
When scanning is complete, CardMinder starts up.
About Actions (for Windows Users)
136