Using The Sleep Timer - Sony STR-DA5800ES Operating Instructions Manual

Menu Explanation
Import Current Loads the present settings of the
Settings receiver and saves those settings
with the Scene. "Input" and
"Volume" are set to "No Change."
Notes
• Settings items saved as "No Change" are not
changed from the present settings even when you
recall the Scene. Select "Edit Saved Scene," then
uncheck the box for a setting item on the edit
screen to set "No Change."
• When you recall the Scene, the settings that cannot
be applied are ignored (e.g., the value for "Sound
Field" when "MULTI IN" is selected, etc.).
Tip
You can recall the setting(s) saved for "1: Movie" or
"2: Music" directly by pressing EASY
AUTOMATION 1 or EASY AUTOMATION 2 on
the receiver or the remote control. You can also
overwrite "1: Movie" or "2: Music" with the present
settings by holding down EASY AUTOMATION 1
or EASY AUTOMATION 2 for 3 seconds in the
same way as you do when you select "Import
Current Settings" from the menu.

Using the sleep timer

You can set the receiver to turn off
automatically at a specified time.
SHIFT
Press SHIFT, then press SLEEP.
Each time you press SLEEP, the display
changes cyclically as follows:
When sleep timer is being used, "SLEEP"
lights up in the display window of the receiver.
To check the remaining time before the
receiver turns off, press SLEEP. The
remaining time appears on the display
window. If you press SLEEP again, the sleep
timer is set to "OFF."
SLEEP
85 GB