The Remote Control - Sony STR-DA5800ES Operating Instructions Manual

Switching the command mode of

the remote control

RM SET
UP
SHIFT
1, 2
1
Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2
Press AMP.
The ZONE button goes off, the AMP
button keeps flashing and the SHIFT
button lights up.
3
Press the numeric button 1 or 2
while the AMP button is
flashing.
When you press 1, the command mode is
set to COMMAND MODE AV1. When
you press 2, the command mode is set to
COMMAND MODE AV2.
The AMP button lights up.
4
Press ENT/MEM.
The AMP button flashes twice, then the
command mode setting process is
completed.
Switching the command mode of
the simple remote control
?/1
AMP
DISPLAY
ZONE
ENT/
MEM
MUTING
Press MUTING and
time while pressing DISPLAY.
at the same
87 GB