Related Manuals for Haier HWM75-78
Summary of Contents for Haier HWM75-78
- Page 1 User's manual Full automatic washing machine This manual is for HWM75-78 Please read this manual carefully before using. Retain it for future reference.
- Page 2 Contents Names of the parts Safety precautions Installation and adjustment Usage of the drain hose Installation the water inlet hose Preparation before washing Put in the laundries Usage of the detergent Use the operation buttons Close the top lid Finish washing Disposal after washing Trouble shooting Answers to question...
-
Page 3: Names Of The Parts
Names of the parts Adjustable foot seam Meaning and description of the symbols Warning sign Forbidding sign Please check if the power receptacle has good earthing condition before using to guarantee your safety. Round cover Attachment block Pulsator Water inlet valve Water absorption cushion Cabinet handle... -
Page 4: Safety Precautions
Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. Earth If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. - Page 5 Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the mannual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding... -
Page 7: Usage Of The Drain Hose
Adjust the Installation position The washing machine away from wall should be overrun 20mm. The largest allowable slope of the shank base of the machine is 1 .The slanting or rough ground will result inunstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal.
Need help?
Do you have a question about the HWM75-78 and is the answer not in the manual?
Questions and answers