Service Checks; 5-Bin Mailbox Service Check - Lexmark 632n - T B/W Laser Printer Service Manual

4060-xxx

Service Checks

Anytime the system board is replaced, the Configuration ID must be reset in NVRAM. Go to
configuration ID" on page
Review the following information before performing any service checks.
•
Paper feed problems (especially paper jams): Go to
check the printer error log for indications of repetitive entries that help to isolate a problem to a
particular area of the printer or option.
•
Paper feed problems with error message: Use the
codes" on page 2-5
•
Print quality problems: Go to
help diagnose problems before changing any settings or working on the printer.
•
Use the resident diagnostics test provided to help isolate a problem before taking the machine
apart or removing any options.

5-Bin mailbox service check

Service tip: The majority of the mechanical components can be observed during operation by
removing the left and right side covers.
Make sure the option(s) are correctly installed and the machine is configured correctly before
attempting to service the unit.
Problems with excessive static electricity buildup.
FRU
1 Front cover assembly
2-38
Service Manual
3-18.
to help diagnose the problem.
"Print quality test pages" on page 3-20
Action
Check the front cover assembly to make sure the ESD brush ground
lead is firmly attached to the 5-Bin mailbox frame. Also check to
make sure the ESD brush is not loose or damaged.
"Viewing the error log" on page 3-6
"Sub error codes for 9xx and 2xx error
and print a test page to
"Setting
and