Replacing Other Consumables - Ricoh Aficio SP C830DN User Manual

4. Replenishing and Replacing Consumables

Replacing Other Consumables

Refer to the maintenance guide provided with the new items for the replacement.
• Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite
on contact with naked flame.
• Store toner (new or used), toner containers, and components that have been in contact with
toner out of reach of children.
• The fusing unit becomes very hot. When installing a new fusing unit, turn off the printer and wait
at least an hour after power off before replacing parts. Not allowing the printer to cool may
result in burns.
• Exposure to light reduces black drum unit/color drum units performance. Replace the unit as
quickly as possible.
• Do not pull out the black drum unit/color drum units quickly or with force as it may fall.
• Take care that nothing comes into contact with the top surface of the black drum unit/color drum
units.
• When holding the black drum unit/color drum units, grab the green grip on the left and the handle
on the front together. Do not move the black drum unit/color drum units by only grabbing the grip.
Doing so may damage the grip.
• Waste toner bottles cannot be reused.
• Purchasing and storing extra waste toner bottles is recommended.
• Before removing the waste toner bottle from the printer, spread paper or some other material
around the area to keep toner from dirtying your workspace.
Black Drum Unit/Color Drum Unit
Replace the drum unit when the following messages appear on the display:
"Replacement of Black Photoconductor Unit is now necessary. Replace Black Photoconductor Unit."
"Replacement of Color Photoconductor Unit is now necessary. Replace Color Photoconductor
Unit."
When the following message appears on the display, the drum unit should be replaced soon.
138