Switching The Display; Extended Desktop - Panasonic CF-W8EWDZZ2M - Toughbook Executive W8 Reference Manual

External Display
<Only for CF-F8 Series>
If you use an external display compatible with "DisplayPort connector", connect it to a "DisplayPort connector" on an
optional mini port replicator (CF-VEBU08U) using a cable compatible with "DisplayPort connector".
CAUTION
Before disconnecting the external display, switch to the internal LCD by pressing Fn+F3. Otherwise the displayed
image quality may become different form before disconnection (e.g., wrong resolution). In this case, press Fn+F3 to
reset the image quality.

Switching the Display

1
Press +
Fn F3
Each time you press the key combination:
Internal LCD
NOTE
<Only for CF-F8 Series>
When an external display is connected to an optional mini port replicator (CF-VEBU08U), the display switching may
work differently form the above. For further information, refer to the instruction manual of the mini port replicator.

Extended Desktop

The extended desktop function allows you to use the working area across both the internal LCD and the external display. You
can drag an object from the internal LCD to the external display and vice versa.
To switch to the Extended desktop
1
Connect the external display.
The [New Display Detected] screen appears. If not, perform the procedure of "To change the display settings"
( page 76).
2
Click [Show different parts of my desktop on each display (extended)].
3
Click [Right] or [Left] for the location of extended desktop, and click [OK].
.
Simultaneous display External display
75