Installing The Utility; Status Indication; Checking The Status Of The Wireless Connection - Panasonic CF-W8EWDZZ2M - Toughbook Executive W8 Reference Manual

Disabling/Enabling Wireless Communication
Wireless Connection Disable Utility
You can automatically disable the wireless LAN connection when a LAN cable is connected to your computer. You need to
install the Wireless Connection Disable Utility to use this function.

Installing the utility

1
Log on to Windows as an administrator.
2
Click (Start) and input [c:\util\wdisable\setup.exe] in [Start Search], and press
Follow the on-screen instructions to install the Wireless Connection Disable Utility.

Checking the status of the Wireless Connection

NOTE
The Wireless Switch Utility should also be installed so that the Wireless Connection Disable Utility works.
The utility does not automatically disable the Bluetooth connection.

Status indication

After installation, the Wireless Connection Disable Utility is automatically started after a user is logged in. An icon appears on
the notification area.
• : Indicates that
• the utility is enabled, and
• the wireless connection is disabled since a LAN cable is connected.
• : Indicates that
• the utility is enabled, and
• the wireless connection is enabled since no LAN cable is connected.
• : Indicates one of the following statuses;
• the utility does not monitor the LAN port status,
• the Wireless Switch Utility has not been started, or
• the built-in wired LAN device is not detected (In case of [LAN] is set [Disabled] in the Setup Utility.) or disabled
with the device manager.
91
.
Enter