Panasonic CF-W8EWDZZ2M - Toughbook Executive W8 Reference Manual page 124

Troubleshooting (Advanced)
<Only for CF-F8/CF-W8 Series>
Disc playback and writing is not possible
Make sure the inserted disc is a compatible media type. For more about compatible media types, see "Disc Information"
( page 54).
You may need to clean the disc.
• Cleaning the disc (
Check whether the disc is distorted, damaged, or dirty.
When inserting a disc, follow the procedure below. Make sure the disc is inserted securely.
Slide the drive power/open switch, and open the disc cover.
A
Slide the disc into the drive under the keyboard with the label side up.
B
Press firmly on the center of the disc until you hear it click into place.
C
<Only for CF-F8/CF-W8 Series>
When a disc is inserted, it is not played automatically
Remove the disc and reinsert it.
• If an AutoPlay CD does not start after the computer resumes from the sleep or hibernation, remove the disc from the
drive, then reinsert the disc again after a 15 second wait.
Follow the procedure below.
Click (Start) - [Control Panel] - [Play CDs or other media automatically].
A
Click right
B
Click [Save].
C
If the problem persists, refer to the disc's operating instructions or other sources to play the disc.
<Only for CF-F8/CF-W8 Series>
If the CD/DVD drive vibrates excessively or is noisy
Is the disc bent or labeled?
Check to see if the disc is inserted correctly, and is in good condition.
When writing to CD-R/RW using Roxio Creator LJB, you can minimize vibration while writing by using the writing speed at
[8x] or less.
page 50)
of the item you want to automatically play and choose the action to play.
124