Starting The Configuration Utility; Editing Pc Card Configurations - Epson ActionNote 866C User Manual

Starting the Configuration Utility

Follow these steps to start the configuration utility:
1. Log onto the directory containing your CardLite software.
2. Type CLCFG and press Enter. You see an introductory
screen about the Card Lite Configuration Utility.
3. Press Enter to continue. You see the CardLite Configuration
screen.
4. If you have an MS-DOS mouse driver installed, you can click
on the menu option to display the corresponding pull-down
menu. You can also press Alt together with the highlighted
letter of the option you want to use.
5. To select a menu option, you can click on the option, move
the cursor to the option and press Enter, or type the
highlighted letter of the option you want to use.
After you have selected an option from a pull-down menu, the
message bar at the bottom of the screen shows how to use
it. Also, you can press Enter for <OK>, F1 for <Help>, and
E for <cancel>. To toggle an option on or off, highlight
SC
it and press the space bar.

Editing PC Card Configurations

The Settings pull-down menu on the CardLite Configuration
screen provides options for editing modem and network cards.
It also allows you to specify when your system beeps.
Note
If your system is working properly, you don 't need to edit
any of the PC card configurations.
Using CardLite
2 - 3