Epson ActionNote 866C User Manual page 35

Network card configuration options
Option
Port*
IRQ*
Memory 1 *
Memory 2*
Fast Token Ring***
* Do not change the displayed values for these options unless you have a
specific reason.
** These values must be between C000h and EF00h and are normally in the
range D000-DFFF. You only need to enter the first two characters for these
values.
*** You may not see this option on your system.
Function
Identifies the base l/O address (in hexadecimal)
for the network card. Except in rare cases, this
value should be between 100h and 3FFh.
Identifies the IRQ for the network card. Can be
any value between 3 and 15 that is available on
your computer.
Displays the value for the first memory window.**
Displays the value for the second memory
window.**
Specifies the speed for a Token Ring card.
Enabling this option sets the Token Ring speed to
16 Megabits per second. When this option is
disabled, the Token Ring speed is 4 Megabits
per second.
Using CardSoft
3 - 5