Error Messages When Starting Up Easymp Multi Pc Projection - Epson PowerLite 955W Operation Manual

Error Messages When Starting up EasyMP Multi PC Projection

Error Messages
This application is already running.
Cannot start this application because other
EPSON Projector software (Quick Wireless
Connection) is already running.
Cannot start this application because other
EPSON Projector software (USB Display) is
already running.
Cannot start this application because other
EPSON Projector software (EasyMP Network
Projection) is already running.
EasyMP Multi PC Projection initialization failed.
Cannot open the shortcut file.
Files are missing or invalid. Failed to start the
application. Reinstall/remove the application.
Remedy
Two instances of EasyMP Multi PC Projection
have been started.
Close Quick Wireless Connection and then start
EasyMP Multi PC Projection.
To close Quick Wireless Connection, perform
Safely Remove Hardware from the icon on the
task bar to remove the Quick Wireless Connection
USB Key from the computer.
Close USB Display and then start EasyMP Multi
PC Projection.
Do one of the following to close USB Display:
• Windows: Disconnect the USB cable from the
projector.
• Mac OS X: Select Disconnect from the USB
Display icon menu on the menu bar or Dock,
and then remove the USB cable.
Close EasyMP Network Projection and then start
EasyMP Multi PC Projection.
Restart EasyMP Multi PC Projection. If the
message is still displayed, uninstall and then
reinstall EasyMP Multi PC Projection.
The shortcut file may be corrupted. Start EasyMP
Multi PC Projection, and then try searching for and
connecting to the projector again.
Uninstall and then reinstall EasyMP Multi PC
Projection.
55