Table of Contents
Advertisement
Inserting / Removing a Disc
This drive has a power-open mechanism. The Disc Cover will not open when the
power is turned off.
Inserting a Disc
%
Cautions:
B Make sure the disc is securely set. (If not, the disc may come off and be
damaged.)
B When the power is off, release the Disc Cover lock using Lock Release Lever
(see p.35).
Note:
B This drive is only compatible with non-cartridge type DVD-RAMs. To use
TYPE2 or TYPE4 DVD-RAMs, remove the discs from cartridges.
# Turn on the drive.
The drive is turned on/off automatically
$
when the computer is turned on/off.
$ Press the Open Button.
(The Disc Cover will open by selecting
[Eject] in the active application.)
% Open the Disc Cover.
& Place a disc onto the disc spindle.
Press on the center of a disc until it locks
&
onto the disc spindle.
#
' Close the Disc Cover.
33
Advertisement
Table of Contents
