Page 2
CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RA- DIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. 12-E-1 WARNUNG! DIESES PROUKT ERZEUGT LASERSTAHLUNG.
Page 3
Connect the equipment into an outlet on a circuit different from that to which the receiv- er is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral.
Introduction Thank you for purchasing the DVD-ROM & CD-R/RW Drive Pack for the Panasonic CF-30 notebook computer series* This drive connects to the computer through the multimedia pocket. Store this manual in a safe place after reading it. For information about the computer(s) for which the DVD-ROM & CD-R/RW Drive Pack can be used, refer to the catalogs, etc.
Handling Precautions Do Not Look Into the Drive Looking directly at the internal laser light source may result in damage to eyesight. Do Not Use Discs That Are Cracked or Deformed Because the discs rotate at high speeds, damaged discs may break apart causing injury. Discs that are not round and discs that have been repaired using adhesives are similarly dangerous, and so should not be used.
Page 6
<For recordable/rewritable discs> Use the Panasonic disc cleaner to clean these discs. Do not use a cloth, CD cleaners or any other such cleaners under any circumstances. How to hold a disc...
Using the Drive Inserting/Removing the Drive For details on how to insert and remove the drive, refer to “Multimedia Pocket” in the Reference Manual included with your computer. Preparations Windows Vista A Click (Start) - [Control Panel] - [System and Maintenance] - [System] - [Device Manager].
Page 8
Using the Drive NOTE To remove a disc when the computer is powered off, insert a pointed object (e.g., the bent-out tip of a paper clip) into the emergency hole (D). Pushing it to the end allows the tray to come out. If the vibration of the drive is excessive, check the disc.
Page 9
Information To play DVD-Video or MPEG2 files, install the DVD playback software using “DVD Drive Utility Disc” (included). For information on how to install the software, refer to page 18. Region Code Setting DVD-Videos are allocated to region codes according to where they are sold. To play a DVD-Video, the player’s software and the drive must have the corresponding region code.
Page 10
Using the Drive Writing to Discs Windows Vista Windows Vista includes the standard function that enables you to write or rewrite data to a disc. Windows Vista You can copy a CD or create a music CD, data CD, etc. by installing “Easy Media Cre- ator”...
Page 11
Recommended discs for writing • The quality of written data depends on the disc. <CD-R> HITACHI MAXELL, Ltd. MITSUBISHI KAGAKU MEDIA CO., Ltd. RICOH Co., Ltd. TAIYO YUDEN Co., Ltd. <CD-RW/High-Speed CD-RW> MITSUBISHI KAGAKU MEDIA CO., Ltd. RICOH Co., Ltd. <Ultra-Speed CD-RW>...
Using the Software If necessary, install the software application contained in the “DVD Drive Utility Disc” (supplied): “Easy Media Creator” and “WinDVD” Before Installing the Software Insert the drive into the multimedia pocket. ( Pocket”) CAUTION Do not install the software using a drive other than this drive. Be sure to insert this drive into your computer, and then insert the disc for installation.
Page 13
Easy Media Creator “Easy Media Creator” is CD writing software application developed by Sonic Solutions. Here, explanations are given on general information about “Easy Media Creator,” the in- stallation procedure, and how to access the online manual. For further information, refer to the online manual of “Easy Media Creator”...
Page 14
Using the Software Installing Easy Media Creator To install the software application, follow the procedure below. CAUTION 1 GB of free space on the hard disk is needed to install all the components of “Easy Media Creator.” Close all other software application before running the Setup program for “Easy Media Creator.”...
Page 15
Windows Vista Use the Packet Write function which Windows Vista includes so that you can write to a CD-R or CD-RW in the same way as in the fl oppy disk operation. When using a disc to which data was written with Drag-to-Disc on another comput- er, install the Drag-to-Disc software.
Page 16
Using the Software How to access the Online Manual After running each utility, you can access the online manual. Windows Vista Easy Media Creator Click [Help] from the menu, and then click [Help]. Drag-to-Disc Click “?” on [Drag-to-Disc] screen. Windows XP Creator Classic Click [Help] from the menu, and then click [Creator Classic Help Center].
Page 17
fi le fi rst for problems with the operating environment or operations. Then install the latest Windows Service Pack. If you still cannot troubleshoot the problem, contact Panasonic Technical Support. For further information, refer to the following URL.
Page 18
Using the Software WinDVD is a software application for DVD playback. Install “WinDVD” using “DVD Drive Utility Disc” ( Installing WinDVD 1 Log on to Windows as an administrator. 2 Set “DVD Drive Utility Disc” in the drive. Windows Vista At the [AutoPlay] message, click [Run SETUPUTIL.EXE] - [Continue].
Page 19
Windows Vista Double-click on the desktop. Click (Start) - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD for Panasonic]. Windows XP Double-click on the desktop. Click [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD]. To access the Online Manual Right-click on the [WinDVD] screen and click [Help].
Page 20
Using the Software NOTE If you maximize the video display window, you can return to the original window size by double-clicking over the images. When the number of display colors is increased, a message appears and the DVD cannot be played: •...
Page 21
DVD Discs Created Using a DVD Recorder The following restrictions apply: Depending on the condition (record quality, cracks, dirt, modifi cation, copy protection, type of drive/disc maker used when creating the disc, etc.) of a disc, it may not be pos- sible to be read or play it correctly.
Troubleshooting The computer does not recog- nize the drive The Multimedia pocket device status indicator does not light Cannot play disc or read data from it “Easy Media Creator” do not work properly Cannot eject disc The disc tray does not close Other disc operation problems Check the settings by following the instructions in “Preparations”...
Einführung Wir freuen uns, dass Sie sich für das DVD-ROM & CD-R/RW-Laufwerk-Pack für Ihr Panasonic-Notebook CF-30 entschieden haben* Dieses Laufwerk wird über das Multimedia Pocket an das Notebook angeschlossen. Sie sollten diese Bedienungsanleitung an einer sicheren Stelle verwahren. Informationen zu den Computern, in denen der DVD-ROM & CD-R/RW-Laufwerk-Pack ver- wendet werden kann, fi...
Vorsichtsmaßnahmen zum Gebrauch Nicht in das Laufwerk blicken Der direkte Blick in die interne Laser-Lichtquelle kann zu Augenschäden führen. Keine CDs mit Rissen oder Verformungen verwenden Auf Grund der hohen Rotationsgeschwindigkeit können beschädigte CDs auseinander bre- chen und Verletzungen verursachen. CDs, die keine runde Form aufweisen oder mit Klebstoffen repariert wurden, sind ähn- lich gefährlich und sollten daher nicht verwendet werden.
Page 26
Sie von der Mitte gerade nach außen wischen, und wischen Sie dann mit ei- nem trockenen Tuch nach, um die verbleibende Feuchtigkeit aufzunehmen. <Für wieder beschreibbare Discs> Verwenden Sie das Panasonic Disc-Reinigungsmittel, um diese Discs zu reinigen. Verwenden Sie auf alle Fälle weder ein Tuch noch CD-Reinigungsmittel oder andere derartige Reinigungsmittel.
Gebrauch des Laufwerks Einsetzen/Entfernen des Laufwerks Hinweise zum Einsetzen/Entfernen des Laufwerks fi nden Sie unter “Multimedia Pocket” Reference Manual, das mit Ihrem Computer mitgeliefert wird. Vorbereitungen Windows Vista 1 Klicken Sie auf (Start) - [Systemsteuerung] - [System und Wartung] - [System] - [Geräte-Manager].
Page 28
Gebrauch des Laufwerks HINWEIS Um die Disc bei ausgeschaltetem Computer zu entfernen, schieben Sie einen spit- zen Gegenstand (z. B. eine aufgebogene Büroklammer) in die Notfallöffnung (D) ein. Durch Einschieben bis zum Anschlag öffnet sich das Fach. (Die genaue Lage der Notfallöffnung hängt von dem jeweiligen Laufwerkmodell ab.) Falls die Disc zu stark vibriert, überprüfen Sie sie.
Page 29
Informationen Um DVD-Video-Discs oder MPEG2-Dateien abzuspielen, installieren Sie die DVD- Wiedergabe-Software mit Hilfe der “DVD Drive Utility Disc Informationen zur Installation der Software fi nden Sie auf Seite 38. Über die Regionalcodeeinstellung Alle DVD-Videos sind mit einem Regionalcode versehen, der sich je nach Verkaufsgebiet unterscheidet.
Page 30
Gebrauch des Laufwerks Schreiben auf Discs Windows Vista Windows Vista umfasst die Standardfunktionen, mit denen Sie Daten auf eine Disc schreiben oder diese neu beschreiben können. Windows Vista Sie können eine CD kopieren oder eine Musik-CD, Daten-CD usw. erstellen, indem Sie “Easy Media Creator”...
Page 31
Zum Schreiben empfohlene Discs • Die Qualität der geschriebenen Daten hängt von der Disc ab. <CD-R> HITACHI MAXELL, Ltd. MITSUBISHI KAGAKU MEDIA CO., Ltd. RICOH Co., Ltd. TAIYO YUDEN Co., Ltd. <CD-RW/High-Speed CD-RW> MITSUBISHI KAGAKU MEDIA CO., Ltd. RICOH Co., Ltd. <Ultra-Speed CD-RW>...
Gebrauch von Software Installieren Sie bei Bedarf die Software-Anwendungen, die auf der “DVD Drive Utility Disc” (mitgeliefert) enthalten sind: “Easy Media Creator” und “WinDVD” Bevor Sie die Software installieren Setzen Sie das Laufwerk in das Multimedien-Ablagefach ein. ( ual “Мultimedia Pocket”) VORSICHT Installieren Sie die Software nicht mit Hilfe eines anderen Laufwerks als diesem Laufwerk.
Page 33
Easy Media Creator “Easy Media Creator” ist eine Software-Anwendungen zum Schreiben von CD, die von Sonic Solutions entwickelt wurde. Nachfolgend finden Sie allgemeine Erkläungen zu der Anwendung “Easy Media Creator”, dem Installationsverfahren und dem Zugriff auf das Online-Handbuch. Weitere Informationen fi nden Sie im Online-Handbuch des “Easy Media Creator” ( Allgemeine Informationen Was man mit dieser Software-Anwendung machen kann •...
Page 34
Gebrauch von Software Installation von Easy Media Creator Fünren Sie das folgende Verfahren durch, um zu installieren. VORSICHT Auf der Festplatte ist ein freier Speicherraum von 1 GB erforderlich, um alle Kom- ponenten von “Easy Media Creator” zu installieren. Schließen Sie alle anderen Software-Anwendungen, bevor Sie das Setup-Programm für die “Easy Media Creator”...
Page 35
Windows Vista Verwenden Sie die Paket-Schreib-Funktion von Windows Vista, um Daten auf eine CD-R oder CD-RW zu schreiben, so wie Sie sie auf eine Diskette schreiben würden. Wenn Sie eine Disc verwenden, auf die mit einem anderen Computer Daten mit der Funktion “Drag-to-Disc”...
Page 36
Gebrauch von Software Zugriff auf das Online-Handbuch Nachdem Sie alle Dienstprogramme ausgefährt haben, haben Sie Zugriff auf die Online- Bedienungsanleitung. Windows Vista Easy Media Creator Klicken Sie im Menü auf [Hilfe] und dann auf [Hilfe]. Drag-to-Disc Klicken Sie im Bildschirm [Drag-to-Disc] auf “?”. Windows XP Creator Classic Klicken sie [Hilfe] aus dem Menü, und klicken Sie dann [Hilfecenter von Creator Classic].
Page 37
Installieren Sie dann das neueste Windows Service Pack. Falls das Problem auf diese Weise nicht behoben werden kann, wenden Sie sich bitte an den Panasonic-Kundendienst. Weitere Informationen fi nden Sie unter dem folgenden URL. http://www.roxio.com/...
Page 38
Gebrauch von Software WinDVD ist eine Software-Anwendung für die DVD-Wiedergabe. Installieren Sie die “WinDVD” Hilfe der “DVD Drive Utility Disc” ( Installation von WinDVD 1 Melden Sie sich bei Windows als Administrator an. 2 Legen Sie “DVD Drive Utility Disc” in das Laufwerk. Windows Vista Wenn die Autostart-Meldung erscheint, klicken Sie auf [SETUPUTIL.EXE ausführen] - [Fortsetzen].
Page 39
Doppelklicken Sie auf der Arbeitsfl äche. Klicken Sie auf (Start) - [Alle Programme] - [InterVideo WinDVD] - [InterVideo WinDVD for Panasonic]. Windows XP Doppelklicken Sie auf der Arbeitsfl äche. Klicken Sie auf [Start] - [Alle Programme] - [InterVideo WinDVD] - [InterVideo WinDVD].
Page 40
Gebrauch von Software HINWEIS Während der Wiedergabe vermeiden Sie Folgendes: • Auswerfen der Disc. • Verwendung anderer Anwendung oder der Eingabeaufforderung. • Ändern der Bildschirmeigenschaften. Falls Sie das Video-Displayfenster maximieren, können Sie erneut auf die ur- sprüngliche Fenstergröße zurückschalten, indem Sie auf den Bildern doppelklicken. Wenn die Anzahl der Anzeigefarben erhöht wird, erscheint eine Meldung, und die DVD kann nicht wiedergegeben werden: •...
Page 41
Wiedergabe von DVDs, die mit einem DVD-Recorder erstellt wurden Es gelten folgende Einschränkungen: Je nach Zustand der Disc (Aufnahmequalität, Kratzer, Schmutz, Einschränkungen, Ko- pierschutz, beim Erstellen der Disk verwendetes Laufwerk/Aufnahmegerät usw.) ist die Wiedergabe ggf. nicht möglich. Um andere Medien als DVD-RAM wiederzugeben, müssen diese fi nalisiert sein (dar- unter versteht man einen Vorgang, der die Wiedergabe dieser Discs auf anderen DVD- Playern usw.
Störungsbehebung Das Notebook erkennt das Laufwerk nicht Die Status-Anzeige des Geräts “Multimedia Pocket” leuchtet nicht E i n e D i s c k a n n n i c h t abgespielt oder gelesen werden “Easy Media Creator” funktionieren nicht rich- Die Disc wird nicht aus- geworfen Das Fach schließt nicht...
Technische Daten Gegenstand Betriebsspannung Laufwerk Datenüber Lesen tragungsrate Schreiben Unterstützte Lesen Discs/Formate Schreiben Zwischenspeicher-Unterlauffehler- Verhütungsfunktion Cache-Speicher Schnittstelle Abmessungen (Breite × Tiefe × Höhe) 132 mm × 149 mm × 14,0 mm Gewicht Zulässige Umgebungsbedingungen Temperatur/Luftfeuchtigkeit Die Datenübertragungsrate pro DVD bei einfacher Geschwindigkeit (1X) beträgt 1.350 KB/s. Die Datenübertragungsrate pro CD bei einfacher Geschwindigkeit (1X) beträgt 150 KB/s.
Introduction Merci d’avoir choisi le Lecteur DVD-ROM & CD-R/RW pour l’ordinateur portable Pana- sonic CF-30* Le lecteur se connecte à l’ordinateur par l’intermédiaire du Multimedia Pocket. Conservez précieusement ce manuel après l’avoir lu. Pour plus d’informations sur les ordinateurs avec lesquel s le Lecteur DVD-ROM & CD-R/RW peutêtre utilisé, consultez le catalogues, etc.
Précautions de manipulation Ne pas regarder dans le lecteur Regarder directement le faisceau laser interne risque d'endommager la vue. Ne pas utiliser de disques fendus ou déformés Les disques tournant à vitesse élevée, les disques endommagés risquent de casser et de vous blesser.
Page 46
<Pour les disques enregistrables/réinscriptibles> Utilisez le produit de nettoyage pour disque Panasonic pour nettoyer ces disques. N’utilisez jamais de tissu, produit de nettoyage pour CD ou autre produit similaire. Comment tenir le disque...
Utilisation du lecteur Insertion/Retrait du lecteur Pour de plus amples informations sur la façon d’insérer ou de retirer le lecteur, reportez- vous à “Multimedia Pocket” dans le Préparatifs Windows Vista 1 Cliquez sur (Démarrer) - [Panneau de confi guration] - [Système et maintenance] - [Système] - [Gestionnaire de périphériques].
Page 48
Utilisation du lecteur REMARQUE REMARQUE Pour retirer un disque lorsque l’ordinateur est éteint, insérez un objet pointu tel que le bout d’un trombone, d’un crayon ou d’un stylo à bille dans l’orifi ce d’urgence (D). En l’insérant complètement, vous dégagerez le tiroir qui pourra alors être sorti complètement.
Page 49
Informations Pour lire un DVD-Vidéo ou des fi chiers MPEG2, installez le logiciel de lecture de DVD au moyen du “DVD Drive Utility Disc”(fourni). Pour plus d’informations sur la manière d’installer le logiciel, reportez-vous à la page 58. Réglages de zone Les DVD-Vidéo possèdent un code de zone qui est assigné...
Page 50
Utilisation du lecteur Pour écrire sur des disques Windows Vista Windows Vista comporte la fonction classique qui permet l’écriture ou la réécriture des données sur un disque. Windows Vista Vous pouvez copier un CD ou créer un CD de musique, un CD de données, etc. en ins- tallant “Easy Media Creator”...
Page 51
Disques recommandés pour l’écriture • La qualité des données enregistrées dépend du disque. <CD-R> HITACHI MAXELL, Ltd. MITSUBISHI KAGAKU MEDIA CO., Ltd. RICOH Co., Ltd. TAIYO YUDEN Co., Ltd. <CD-RW/High-Speed CD-RW> MITSUBISHI KAGAKU MEDIA CO., Ltd. RICOH Co., Ltd. <Ultra-Speed CD-RW> MITSUBISHI KAGAKU MEDIA CO., Ltd.
Utilisation du logiciel Si nécessaire, installez les applications logicielles que contient le disque “DVD Drive Util- ity Disc” (fourni) : “Easy Media Creator” et “WinDVD” Avant d’nstaller le logiciel Insérez le lecteur dans l’appareil Multimedia Pocket. ( “Multimedia Pocket”) ATTENTION N’installez pas le logiciel en utilisant un lecteur autre que ce lecteur.
Page 53
Sur les copies <Pour la France> Panasonic rappelle que le logiciel fourni avec le présent produit Panasonic est conçu pour vous aider à reproduire des œuvres dont vous êtes titulaires des droits d’auteur, ou pour les- quelles vous avez obtenu une autorisation auprès du titulaire des droits d’auteur. Dans le cas contraire, toute reproduction sera considérée comme une infraction à...
Page 54
Utilisation du logiciel Installation de Easy Media Creator Pour installer, suivez la procédure décrite ci-dessous. ATTENTION 1 Go d’espace libre sur le disque dur est nécessaire pour installer tous les compo- sants de “Easy Media Creator”. Fermez toutes les autres applications logicielles avant d’exécuter le programme d’installation des “Easy Media Creator”.
Page 55
Windows Vista Utilisez la fonction Packet Write de Windows Vista pour écrire sur un CD-R ou un CD-RW de la même manière que sur une disquette. Lors de l’utilisation d’un disque sur lequel des données ont été écrites avec Drag- to-Disc sur un autre ordinateur, installez le logiciel Drag-to-Disc.
Page 56
Utilisation du logiciel Comment accéder au manuel en ligne Après exécution de chaque utilitaire, vous pouvez accéder au manuel en ligne. Windows Vista Easy Media Creator Cliquez sur [Aide] dans le menu, puis cliquez sur [Aide]. Drag-to-Disc Cliquez sur “?” sur l’écran [Drag-to-Disc]. Windows XP Creator Classic Cliquez sur [Aide] dans le menu, puis cliquez sur [Creator Classic - Aide en ligne].
Page 57
Puis installez le dernier Service Pack Windows. Si vous ne pouvez toujours pas remédier au probleme, prenez contact avec l’assistance technique de Panasonic. Reportez-vous à l’URL suivant pour plus d’informations. http://www.roxio.com/ (Démarrer) - [Ordinateur], cliquez avec le bouton...
Page 58
Utilisation du logiciel WinDVD est une application logicielle pour la lecture de DVD. Installez “WinDVD” au moyen du “DVD Drive Utility Disc” ( Installation de WinDVD 1 Ouvrez une session Windows en tant qu’administrateur. 2 Insérez “DVD Drive Utility Disc” dans le lecteur. Windows Vista Lorsque le message Exécution automatique s’affi...
Page 59
Windows Vista Double-cliquez sur le bureau. Cliquez sur (start) - [Tous les programmes] - [InterVideo WinDVD] - [InterVideo WinDVD for Panasonic]. Windows XP Double-cliquez sur le bureau. Cliquez sur [Démarrer] - [Tous les programmes] - [InterVideo WinDVD] - [InterVideo WinDVD].
Page 60
Utilisation du logiciel REMARQUE REMARQUE Pendant la lecture vidéo, n’effectuez pas les opérations suivantes: • Éjecter le disque. • Utiliser d’autres applications ou invite de commande. • Modifi er les paramètres des propriétés de l’écran. Si vous agrandissez au maximum la fenêtre d’affi chage vidéo, vous pouvez revenir à...
Page 61
Disques DVD créés avec un enregistreur DVD Les restrictions suivantes s’appliquent : La lecture d’un disque peut ne pas être possible en fonction des conditions (qualité d’enregistrement, fi ssures, poussières, modifi cation, protection contre la copie, type de lecteur/logiciel d’enregistrement utilisé pour créer le disque, etc.). Afi...
Dépannage L’ordinateur n’identifi e pas le lecteur Le témoin d’état de l’appareil Multimedia Pocket allume pas Impossible de lire le disque ou d’accéder à ses données “Easy Media Creator” ne fonctionnent pas correctement Le disque ne peut pas être éjecté Le tiroir de disque ne se ferme pas Autres problèmes de fonc- tionnement du disque...
Spécifi cations Article Tension de fonctionnement Lecteur Taux de Lecture* transfert des Écriture* donnée* Disques/ Lecture formats pris en charge* Écriture Fonction de prévention de sous- utilisation de la mémoire tampon Mémoire cache Interface Dimensions (largeur × profondeur × hauteur) Poids Température en fonctionnement/ taux d’humidité...
Page 71
ディスクに書き込みや書き換えを行う Windows Vista Windows Vista には、ディスクに書き込み/書き換えができる機能が標準でつ いています。 Windows Vista 付属の「DVD Drive Utility Disc」から「Easy Media Creator」をインストール すれば、CD をコピーしたり、音楽 CD やデータ CD を作成したりすることが 75 ページ) できます。 ( Windows XP ディスクへのデータ書き込みには、ライティングソフトウェアが必要です。 付属の「DVD Drive Utility Disc」を使って「Easy Media Creator」をインストー ルしてください。インストールの方法については、75 ページをご覧ください。 書き込み/書き換え速度に応じたディスクをご使用ください。 ( 書き込み作業が長時間におよぶ場合は、パソコンの AC アダプターを接続して おいてください。作業中にバッテリー切れが起こると書き込みに失敗する場合...
Page 74
ソフトウェアを使う Easy Media Creator 「Easy Media Creator」は、Sonic Solutions 社によって開発された CD ライティ ングソフトウェアです。 本紙では、 「Easy Media Creator」の概要、インストールのしかた、オンライン ヘルプの見かたなどについて説明しています。詳しくは、 「Easy Media Creator」 のオンラインヘルプをご覧ください。 ( 概要 「Easy Media Creator」でできること ・ 音楽 CD の作成、データ CD の作成 ・ バックアップ CD の作成 ・ 複数のディスクに分割されたバックアップデータの復元 Windows XP ・...