Panasonic KXL-CB30AU Operating Instructions Manual page 28

Setup Your Computer
2
Click [CB30A Driver] in Setup Menu.
3
OS Check window appears. Click [Yes].
UDF Reader installation program starts.
4
Setup window appears. Click [UDF Reader] and select [Install],
then click [OK].
5
When Installation completion window appears, click [OK].
When UDF Reader has been installed from the floppy disk, remove the
floppy disk, then restart the computer following the on-screen instructions.
When installed from CD-ROM, restart the computer following the on-screen
instructions.
Note:
B It is necessary to restart the computer in order to enable the UDF Reader
after installation.
I To uninstall UDF Reader
Follow the steps on p.27 and 28, then at step 4, click [UDF Reader] and
select [Uninstall] on the Setup window, then click [OK].
28