Table of Contents
Advertisement
7.1.2
Creating a RAID driver disk (for PX4 Model)
You may have to use another system to create the RAID driver disk from the
system/motherboard support CD or from the Internet.
A floppy disk with the RAID driver is required when installing Windows
Red Hat
Enterprise / SuSE operating system on a hard disk drive that is included
®
in a RAID set connected to the TX4650 SAS RAID controller card. Follow the next
steps to create a RAID driver disk.
Windows
Server
®
To create a RAID driver disk in Windows
1.
Place your blank diskette in the appropriate drive.
2.
Insert the Promise Cd into your optical disc drive.
The display screen should open automatically. If the display screen does not
open, click My Computer > CD Drive D: and double-click the Launch.exe
icon.
3.
Click the Windows Driver button.
The Disk Copy Utility opens.
4.
Click the Create button in the Utility.
A confirmation box appears.
Click the Yes button in the confirmation box
5.
The utility prepares your driver diskette. When the utility is finished, it displays
a message.
6.
In the message, click the OK button, then click the Exit button to close the
Promise CD.
Red Hat
Enterprise Linux/SUSE Linux Enterprise Server:
®
To create a RAID driver disk in Red Hat
server environment:
1.
Place your blank diskette in the appropriate drive.
2.
Insert the Promise CD into your CD-ROM drive.
The display screen should open automatically. If the display screen does not
open, open the CD manually in your graphic user interface.
3.
Click the Linux Driver button.
4
Manually copy the driver image file to your PC's hard drive or a USB memory
stick.
ASUS TS300-E5
Server environment:
®
Enterprise Linux / SUSE Linux Enterprise
®
Server or
®
7-5
Advertisement
Table of Contents
