12. Press the down arrow key to move to Disk Assignments. Press the spacebar
to toggle between N and Y for each available drive. Y means this physical
drive will be assigned to the logical drive.
Assign the appropriate number of physical drives to your logical drive.
13. Press Ctrl-Y to save your logical drive configuration.
If you set Fast Init to ON, the following message displays:
Press Ctrl-Y again to create the logical drive and perform the Fast
Initialization.
The Define LD menu displays your new logical drive:
14. Press Esc to exit to the Main Menu. Press Esc again to exit the Utility.
15. Press Y to restart your computer.
You have successfully created a new RAID logical drives.
You must be partition and format your new logical drive before you can use it.
ASUS TS300-E5
6-53