Button Board Installation - Acer Aspire Z1100 Service Manual

6. Remove button board frame from guidepin (G) on front bezel.
7. Remove screws (H) from button board frame. (Figure 3-24)
Figure 3-24. Button Board Screws
8. Remove button board (J) from frame (A).

Button Board Installation

1. Install button board (J) to frame (A). (Figure 3-24)
2. Install and secure screws (H) to button board frame.
3. Move front bezel until button board frame is clear of latches (F), as shown in
4. Align and install button board frame with guidepin (E) and (G) on front bezel.
5. Install and secure screws (D) to front bezel.
6. Connect button board cable (C) to button board connector (B).
7. Install back cover.
3-28
ID Size
D M2.5x4.0 Ni
H M2.0x4.0
H
J
Quantity Screw Type
2
2
Machine Maintenance Procedures
A
Figure 3-23.
(Figure 3-22)
0