Camera Module Removal - Acer Aspire Z1100 Service Manual

Camera Module Removal

Prerequisite:
1. Disconnect right function board cable (A) from function board connector (B). (Figure 3-25)
Figure 3-25. Function board Cable
2. Remove right function board cable from guides (C) on middle frame.
3. Remove screws (D) from camera bracket. (Figure 3-26)
Figure 3-26. Camera Module
4. Remove camera module (E) from camera bracket.
Machine Maintenance Procedures
Back cover Removal
0
C
D
A
B
E
3-29