Dos Flash Utility - Acer Aspire Z1100 Service Manual

DOS Flash Utility

Perform the following to use the DOS Flash Utility:
1. Press F2 during boot to enter Setup Menu.
2. Select Boot Options to modify boot priority order.
3. Move Removal Device to 1st Boot Device position (Figure 2-15). (Refer to
menu)
Main Advanced
Boot Priority Order
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
5th Boot Device
UEFI Boot Device Priority
Hard Disk Drive Priority
Optical Disk Drive Priority
Removal Device Priority
Network Device Priority
Quite Boot
Halt On
Figure 2-15. Change BIOS Boot priority Order
4. Copy the BIOS file to USB HDD.
5. Insert the USB HDD and reboot computer to DOS mode.
6. Execute A to update BIOS.
NOTE:
NOTE:
During update, do not press any keys.
7. When flash is complete, system will restart automatically when finished.
2-16
BIOS Setup Utility
Power Security Boot Options
[Removable Device]
[Hard Disk: ST31000..]
[CD&DVD: HL-DT-ST..]
[UEFI]
[LAN]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Enabled]
[All, but Keyboard]
Version 2.10.1208. Copyright (C) 2002-2010, Acer Inc.
0
Exit
Set Boot Priority
Select Screen
Select Item
Enter: |Select
+/-: 11||Change Opt.
F7: Load User-defined Defaults
F8: Save as User-defined
F9: Optimized Defaults
(When Access Level is
Administrator)
F10: Save & Exit
System Utilities
Boot Options