Converter Board Removal
Prerequisite:
1. Locate converter board (A) on middle frame. (Figure 3-10)
Figure 3-10. Converter Board
2. Disconnect the following cables:
Converter cable (B) from converter board connector (D)
Change board FFC (E) from converter board connector (F)
3. Remove screws (C) from middle frame.
4. Remove converter board.
Converter Board Installation
1. Install converter board (A) to middle frame. (Figure 3-10)
2. Install and secure screws (C) to middle frame.
3. Connect the following cable:
Converter cable (B) to converter board connector (D)
Change board FFC (E) to converter board connector (F)
4. Install back cover.
3-16
Back cover Removal
A
F
E
C
ID
Size
C
M3.0x5.0
0
B
C
D
Quantity
Screw Type
2
Machine Maintenance Procedures
0