Button Board Removal
Prerequisite:
1. Locate button board frame on front bezel. (Figure 3-22)
Figure 3-22. Button Board
2. Disconnect button board cable (C) from button board connector (B).
3. Remove screws (D) from front bezel.
4. Lift button board frame (A) from guidepin (E).
5. Move front bezel until button board frame is clear of latches (F), as shown in Figure 3-23.
Figure 3-23. Front bezel Latches
Machine Maintenance Procedures
Back cover Removal
ODD Module Removal
E
D
F
0
A
B
C
G
F
3-27