Function Board Removal - Acer Aspire Z1100 Service Manual

Function board Removal

Prerequisite:
NOTE:
NOTE:
Function board must be shipped with LCD panel for RMA.
1. Locate function board (A) on middle frame. (Figure 3-9)
Figure 3-9. Function board
2. Disconnect the following cables:
 Right function board cable (C) from function board connector (B)
 Left function board cable (D) from function board connector (E)
 function board cable (G) from function board connector (H)
3. Remove screws (F) from middle frame.
4. Remove function board from middle frame.
3-14
Back cover Removal
A
B C
F
0
D
E
F
H
Machine Maintenance Procedures
G