For Service, Spares or any advise in the UK, please contact your Customer Care line agent at 08706 055 055. For Service, Spares or any advise in other locations, please refer to your local telephone directory for your nearest Electrolux Service Agent. Multi-Steamer Household Type Steam Cleaner Owner’s Guide...
This appliance is intended for household use only. • • Any repair work, including the replacement of the power cord must only be carried out by an Authorised Electrolux Service Agent because a special tool is required. Call for nearest service location.
It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, have it done by a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.
Description of the Multi-Steamer Steam Cleaner 1. Handle 2. Safety filler cap 3. Steam ready amber indicator light 4. Power on green indicator light 5. On (I) Off (O) Switch 6. Cleaner body 7. Floor cloth 8. Floor brush 9. Elbow 10.
INSTRUCTIONS FOR USE The Electrolux Multi-Steamer steam cleaner is designed to thoroughly clean hard surfaces and upholstery that will withstand high heat. Do not use on soft plastics, unsealed wood, and cold glass. Check with the manufacturer of all upholstery types that the fabric can be steam cleaned.
HOW TO ASSEMBLE AND USE (continued) The round brush and curved nozzle can be fitted to the straight nozzle or the spray nozzle connection. Curved Nozzle Attachments 7. Fabric brush and window squeegee. The fabric brush can be attached to spray nozzle. The brush can be fitted with the window squeegee.
9. Floor Brush. This accessory is used with wands, and is provided with a floor cloth. To attach the cloth, rest the brush on the center of cloth and then pull the cloth edges one by one under retaining springs as shown below. The slide indicator may be used to retract the center of the floor brush to expose the bristles.
FILLING THE BOILER TANK DURING USE 12. When the water runs out, steam is no longer supplied when steam delivery button is pressed. To fill up boiler tank, follow these steps: Turn off the cleaner by pressing on/off button. Unplug the cleaner from electrical outlet. Press steam delivery button until all pressure has been released.
For Service, Spares or any advise in the UK, please contact your Customer Care line agent at 08706 055 055. For Service, Spares or any advise in other locations, please refer to your local telephone directory for your nearest Electrolux Service Agent.
The guarantee may be invalidated by unauthorised repair or modification of the appliance. d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.