Electrolux UltimateCare 700 / 500 Manual
![]()
GETTING STARTED
- Before first use, remove all adhesive remains and gently rub with a dampened cloth. Rinse the water tank to remove foreign particles. When switched on for the first time, temporary vapours/odours may occur.
![]()
- Remove the water tank and fill water into it. This product is appropriate for use with tap water. Never put scented water or ironing aids in the water tank. This may cause brown spitting and staining. Place the water tank in the main unit.
![Electrolux - UltimateCare 700 - GETTING STARTED - Step 1 GETTING STARTED - Step 1]()
- Insert the plug into the power socket.
For E5GS2-42WP, press the ON/OFF switch button to heat up the product. For E7GS2-72xx, select the program to achieve the desired steam setting. Program | Description |
Refresh | Gentle steam; For quick refresh of clothes |
De-wrinkle | Strong steam; For reducing wrinkles |
![]()
- The power light will be on and steam will be released after 30 seconds. Hang clothes on the clothes rack or place on an ironing board. Press the trigger switch to release steam if desired.
![]()
Do not release steam towards people or animals.
![Electrolux - UltimateCare 700 - GETTING STARTED - Step 2 GETTING STARTED - Step 2]()
- For E7GS2-72xx, toggle once to switch between programs. Press the trigger switch to release steam if desired.
![Electrolux - UltimateCare 700 - GETTING STARTED - Step 3 GETTING STARTED - Step 3]()
- Switch off the product and unplug from the mains. Allow the product to cool down for at least 1 hour.
![Electrolux - UltimateCare 700 - GETTING STARTED - Step 4 GETTING STARTED - Step 4]()
CLEANING AND CARE
- Remove the water tank from the main unit, drain the remaining water from the water tank.
![]()
- Recommended to coil the cord around the main unit and secure the cord with the clip.
![Electrolux - UltimateCare 700 - CLEANING AND CARE - Step 1 CLEANING AND CARE - Step 1]()
- In areas with medium water hardness, we recommend to descale the product every 6 months, while in areas with very hard water, we recommend to descale every 3 months.
- Mix a descaler agent and water at the specific ratio (refer to pictorial instruction, point 9). Fill the mixture into the water tank and place the water tank in the main unit. Trigger the steam switch until no mixture is left in the tank.
- Fill in clean water into the water tank and place the water tank in the main unit. Likewise, trigger the steam switch until no water is left in the tank.
ACCESSORIES
![Electrolux - UltimateCare 700 - ACCESSORIES ACCESSORIES]()
Accessory | Description |
Brush | For removing fluff and hair from garments. |
Protective glove / Accessory bag | For protection against scalding from the steam released from the steam nozzle / For storage of accessories and main unit. |
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Due to the Electrolux of continual product development; specificatios, colours, and details of our products and those mentioned in this manual are subject to change without notice.
www.electrolux.com;
Visit our website to:
Get usage advice, brochures, trouble shooter, service information: www.electrolux.com
Register your product for better service: www.electrolux.com/productregistration
Buy accessories and consumables for your appliance: www.electrolux.com/shop
SAFETY ADVICE
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
Keep the fabric steamer and its cord out of reach of children less than 8 years when it is energized or cooling down.
The fabric steamer must not be left unattended while it is connected to the supply mains. - If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
The fabric steamer is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. - Care should be taken when using the appliance due to the emission of steam.
- Unplug the appliance during filling and cleaning.
- Regarding the details of filling, cleaning and descaling please refer to Instruction book.
- This appliance is suitable to operate on both 50 and 60Hz.
![]()
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Electrolux UltimateCare 700 / 500 Manual
Need help?
Do you have a question about the UltimateCare 700 and is the answer not in the manual?
Questions and answers