NOTE: Unplug the electrical cord before servicing.
Appliance won't start.
Appliance spits water
out of nozzle.
Water boils out of fill spout
when adding water.
Accessories will not stay
Too much water in tank. Do not
Water condensed in wand and the
Not fully preheated.
Water tank too hot.
Not properly installed.
Assembly or related accessories.
Push plug securely into outlet. V erify power
on light is on.
Try another outlet.
Check circuit breaker.
Check the water level in the tank.
Press steam delivery button and discharge
any water that has formed in wand and hose
into a container. As soon as the appliance is
supplying steam only, direct steam jet
towards the floor and press steam delivery
button at least two or three times.
Allow more time for water to heat up.
Allow more time for cooling.
Add water slowly.
Use special funnel provided.
Check for proper assembly.
Review this guide for assembly instructions.
For Service, Spares or any advise in the UK,
please contact your Customer Care line agent
at 08706 055 055. For Service, Spares or any
advise in other locations, please refer to your
local telephone directory for your nearest
Electrolux Service Agent.