Table of Contents
Advertisement
same way you enter directory entries (see page 22). Enter all nine digits and press
DISP/ENT H/M/L.
4.
The radio displays the MMSI number you are about to contact and asks you to
confirm. If you want to request the position of the displayed MMSI number, select
Send. To cancel the request, select Exit.
5.
When the other station responds, the radio displays the MMSI number, the longitude,
and the latitude of the other station. If your radio is connected to a chartplotter
through the NMEA OUT connection (see page 34), the position information will also
be displayed on the plotter screen.
6.
If the other station does not have valid GPS data, the radio displays No Position.
Position Reply
When another station requests your current position, different screens display depending on
whether you set Position Reply to Auto or Manual.
If Position Reply is set to Auto:
Position Request
Harris
06/20 11:00
Routine
No action is necessary.
Position Send
If you are requesting assistance or using an all ships call to give a safety warning, you can
send your current position so other stations know where you are:
1.
Press and hold MENU/CALL to display the Call menu.
2.
Select Position Send.
3.
The radio displays the names listed in your directory; use Channel Up and Channel
Down to choose the directory entry you want to contact and press DISP/ENT H/M/L.
If you want to contact a station that is not in your directory, select Manual. The radio
prompts you to enter the MMSI number you want to call. Enter the MMSI number the
same way you enter directory entries (see page 22). Enter all nine digits and press
DISP/ENT H/M/L.
4.
The radio displays the MMSI number you are about to contact and asks you to
confirm. If you want to transmit your position to the displayed MMSI number, select
Send. To cancel the transmission, select Exit.
5.
The radio transmits your MMSI number, your longitude, and your latitude to the other
station.
PUtting the raDiO intO stanDBy
If you are leaving your radio or do not wish to answer any DSC calls, you can put your radio
in standby mode. If your radio receives an individual call, it will automatically respond with
16
USA
Exit
[CLR]
Select Send to send a reply or Exit to reject
Uniden MHS235 Radio Owner's Manual
If Position Reply is set to Manual:
Position Request
Harris
16
Reply
USA
Send
Exit
[ENT]
[CLR]
the request.
E-27
Advertisement
Table of Contents
